Allen-Bradley 1756-EN2F ControlLogix EtherNet/IP Fiber Interface Module 10/100 Mbps, 128 TCP/IP connections, Series A
Technical Specifications
Electrical
With optical interface Yes
Supporting protocol for TCP/IP Yes
Supporting protocol for DeviceNet No
Supporting protocol for other bus systems No
Redundancy No
IO link master No
Supporting protocol for DeviceNet Safety No
Supporting protocol for EtherNet/IP Yes
Power dissipation 6.2 W
Thermal dissipation 21.28 BTU/h
Enclosure type rating None (open-style)
Ethernet ports 1 Ethernet fiber
CIP unconnected messages 128 + 128 (backplane + Ethernet)
Current draw 1.2 A @ 5.1V DC, 3 mA @ 24V DC
Ethernet cable Multimode fiber, LC connector
Wiring category 3 - on USB ports
Communication rate 10/100 Mbps
Connections supported, max TCP: 128, CIP: 256 (CIP connections can be used for all explicit or all implicit applications. for example, a 1756-ENBT module has a total of 128 CIP connections that can be used for any combination of connections.)
Isolation voltage 30V (continuous), basic insulation type, USB to backplane type tested at 980V AC for 60 s
Supporting protocol for LON No
Supporting protocol for ASI No
Supporting protocol for PROFIBUS No
Supporting protocol for CAN No
Supporting protocol for INTERBUS No
Supporting protocol for KNX No
Supporting protocol for Modbus No
Supporting protocol for Data-Highway No
Supporting protocol for SUCONET No
With potential separation No
Supporting protocol for SERCOS No
Supporting protocol for INTERBUS-Safety No
Radio standard Bluetooth No
Radio standard Wi-Fi 802.11 No
Supporting protocol for AS-Interface Safety at Work No
Supporting protocol for Foundation Fieldbus No
Supporting protocol for PROFINET CBA No
Supporting protocol for PROFINET IO No
Supporting protocol for PROFIsafe No
Supporting protocol for SafetyBUS p No
Radio standard GPRS No
Radio standard GSM No
Radio standard UMTS No
Slot width 1
ATEX temp code T4
Transmitter launch power, min At beginning of Life (BOL): -19 dBm into 62.5/125 μm fiber, N/A = 0.275, -22.5 dBm into 50/125 μm fiber, N/A = 0.20, Allow -1 dB at End of Life (EOL)